Co-extruded yellow-green bi-color tubing for ground wire identification per IEC 60445.
| Models | LRS-YG |
|---|---|
| Operating temp | -55 to +105 °C |
| Standards | IEC 60445, IEC 60502-2, GB/T 12706 |
LRS-YG is a co-extruded yellow-green bi-color heat shrink tubing that marks ground conductors permanently. The color is part of the wall rather than a surface print, so ground wire identification per IEC 60445 survives abrasion and cleaning.
| Property | Requirement | Typical |
|---|---|---|
| Tensile strength | ≥10 MPa | 11–16 MPa |
| Elongation | ≥300% | 330–450% |
| Dielectric strength | >20 kV/mm | 23–26 kV/mm |
| Operating temperature | — | -55 to 105°C |
Internal test data. Questions on parameters? Contact our engineers.
| Parameter | Value |
|---|---|
| Shrink ratio | See product page |
| Sizes | Multiple available |
| Colors | Black, red, yellow, green |
Standard color: black. Custom colors available — contact our sales team.
Mark protective earth conductors with the IEC 60445 yellow-green code. The color stays legible for the life of the install.
Identify ground and phase conductors in MV cable accessories. Keeps panel wiring consistent across crews and sites.
Salt spray and oil resistance suits marine and industrial ground runs. LSZH options fit enclosed construction spaces.
Still deciding? Contact our engineers.
Heat shrink tubing rarely fails in service when it's the right product, correctly installed.…
Solar installations push cable protection harder than most environments. DC strings on a rooftop…
Insulated busbars let you build smaller switchgear. Instead of relying on air clearances between…
General-purpose insulation tubing in two grades. 28 sizes from 0.8…
Adhesive-lined tubing for waterproof sealing. SRS-3X and SRS-4X in 3:1…
Adhesive-lined thick-wall tubing for cable jacket repair and direct burial.…
Tell us your cable size, voltage and environment. We reply within one business day.
Request a Quote