Complete kits for 0.6/1 kV XLPE cables. 1-5 core.
| Models | TRSY-1 / JRSY-1 |
|---|---|
| Operating temp | -55 to +105 °C |
| Voltage class | 0.6/1 kV |
| Standards | IEC 60502-2, GB/T 12706 |
TRSY-1 and JRSY-1 are complete low voltage cable kits for 0.6/1 kV XLPE cables. TRSY-1 covers terminations and JRSY-1 covers straight joints, each supplied with all sleeves, seals and materials for a full installation.
The kits suit 1 to 5 core cables and are the everyday workhorse for LV distribution, building wiring and industrial installations.
| Property | Requirement | Typical |
|---|---|---|
| Tensile strength | ≥10 MPa | 11-16 MPa |
| Elongation | ≥300% | 330-450% |
| Dielectric strength | >20 kV/mm | 23-26 kV/mm |
| Operating temperature | — | -55 to 105°C |
Internal test data. Questions on parameters? Contact our engineers.
| Parameter | Value |
|---|---|
| Shrink ratio | See product page |
| Sizes | Multiple available |
| Colors | Black, red, yellow, green |
Standard color: black. Custom colors available — contact our sales team.
Terminations and joints for 0.6/1 kV feeder and service cables. Complete kits speed up pole, pillar and substation work.
1-5 core coverage fits risers, distribution boards and lateral runs. Color-coded sleeves keep phase identification clear.
Wire and cable protection in factories and plants. The -55 to 105°C operating range covers outdoor and heated areas.
Still deciding? Contact our engineers.
Heat shrink tubing rarely fails in service when it's the right product, correctly installed.…
Solar installations push cable protection harder than most environments. DC strings on a rooftop…
Insulated busbars let you build smaller switchgear. Instead of relying on air clearances between…
Tell us your cable size, voltage and environment. We reply within one business day.
Request a Quote
