Cross-linked polyolefin tubing engineered for automotive fuel line protection, wire harness sealing, and EV cable management. Qualified to IATF 16949 with third-party oil resistance testing.
| Models | YRS-5 / YRS-6 / YRS-8 / YRS-10 / YRS-12 |
|---|---|
| Recovered wall | 0.70–0.82 mm by size |
| Standards | IATF 16949:2016, RoHS, Customer Spec |
YRS series heat shrink tubing is a single-wall or dual-wall cross-linked polyolefin product designed specifically for automotive fuel line and wire harness applications. The outer layer provides abrasion resistance and fluid barrier properties; an optional adhesive inner layer creates a waterproof seal at cable exits and connector transitions.
| Property | Test Method | Requirement | Typical Value |
|---|---|---|---|
| Appearance | Visual | Smooth surface, no defects | Pass |
| Material | — | Cross-linked polyolefin | — |
| Full recovery temperature | — | 110°C minimum | 110°C |
| Continuous operating range | — | -55°C to 105°C | -55°C to 105°C |
| Tensile strength | ASTM D638 | ≥15 MPa | 16 MPa |
| Elongation at break | ASTM D638 | ≥400% | 420% |
| Longitudinal change | — | -3% to +3% | -1% |
| Wall bias | — | ≤20% | 12% |
| After aging: tensile (120°C, 24 h) | ASTM D638 | ≥12 MPa | 13.5 MPa |
| After aging: elongation (120°C, 24 h) | ASTM D638 | ≥200% | 240% |
| Stress cracking (50°C, 24 h) | — | No cracking | Pass |
| Cold bend (-35°C, 1 h) | — | No cracking | Pass |
Internal test data. Questions on parameters? Contact our engineers.
| Model | Fuel Line OD (mm) | Expanded ID (mm) | Wall — Exp. (mm) | Recovered ID (mm) | Wall — Rec. (mm) | Spool (m) |
|---|---|---|---|---|---|---|
| YRS-5 | Φ3.50 | 5.3 ±0.3 | 0.70 ±0.04 | 3.0 ±0.3 | 1.0 ±0.05 | 200 |
| YRS-6 | Φ4.76 | 7.0 ±0.3 | 0.74 ±0.04 | 4.0 ±0.4 | 1.0 ±0.05 | 100 |
| YRS-8 | Φ6.35 | 9.0 ±0.3 | 0.75 ±0.05 | 5.6 ±0.4 | 1.0 ±0.05 | 100 |
| YRS-10 | Φ8.00 | 10.5 ±0.3 | 0.80 ±0.05 | 7.0 ±0.4 | 1.1 ±0.05 | 100 |
| YRS-12 | Φ10.00 | 12.5 ±0.3 | 0.82 ±0.05 | 8.0 ±0.4 | 1.2 ±0.05 | 50 |
Standard color: black. Custom colors available — contact our sales team.
YRS tubing slides over nylon or PVF fuel lines and shrinks to form a smooth, oil-resistant outer jacket. Verified by 72-hour fuel and brake fluid immersion tests.
Seals against splash exposure to fuel, oil, and road grime at connector transitions and harness branches. Optional adhesive lining keeps moisture out of splices.
Physical barrier over orange HV cable jacketing at grommet passes and bend points. Custom colors support high-voltage identification schemes.
Still deciding? Contact our engineers.
Heat shrink tubing rarely fails in service when it's the right product, correctly installed.…
Solar installations push cable protection harder than most environments. DC strings on a rooftop…
Insulated busbars let you build smaller switchgear. Instead of relying on air clearances between…
Semi-rigid, high-tensile heat shrink tubing for rebar insulation in railway…
Heat shrink terminations for 10-35 kV XLPE cables. Type tested.…
Track-resistant silicone tubing for medium voltage insulation where pollution, moisture…
Tell us your cable size, voltage and environment. We reply within one business day.
Request a Quote