Adhesive-lined end caps that seal cable ends against moisture ingress during storage, transport and installation.
| Voltage class | LV to 35 kV |
|---|---|
| Standards | ISO 9001, Test reports |
Heat shrink end caps are adhesive-lined closures for sealing cable ends. When heat is applied, the crosslinked polyolefin body recovers onto the cable while the hot-melt adhesive flows to form a moisture barrier at the cut end, protecting the cable during storage, transport and installation.
The caps are supplied as replacement parts for our termination and joint kits and as standalone items for cable accessory assemblers, panel builders and utility maintenance teams. They are manufactured from the same radiation-crosslinked polyolefin materials used in our complete accessory kits, ensuring compatibility and consistent performance. Various diameters are available to match the cable outer diameter.
| Parameter | Value |
|---|---|
| Voltage range | LV to 35 kV |
| Material | Crosslinked polyolefin with hot-melt adhesive |
| Sealing function | Seals cable ends against moisture ingress |
| Intended phases | Storage, transport and installation |
| Sizes | Various diameters to match cable OD |
| Quality system | ISO 9001 |
Standard color: black. Custom colors available — contact our sales team.
Stock end caps so field repair crews can reseal cable ends without replacing an entire kit.
Use end caps in switchgear and panel assembly for cable preparation and temporary sealing.
Seal cable drum ends against moisture until joints and terminations are made on site.
Still deciding? Contact our engineers.
Heat shrink tubing rarely fails in service when it's the right product, correctly installed.…
Solar installations push cable protection harder than most environments. DC strings on a rooftop…
Insulated busbars let you build smaller switchgear. Instead of relying on air clearances between…
Tell us your cable size, voltage and environment. We reply within one business day.
Request a Quote
